IDS IW25-5 On Wall Dehumidifier

 The  IW-25-5 ON WALL Dehumidifier utilises its integral humidistat to monitor the conditioned space. When the relative humidity goes above the selected setpoint, the dehumidifier will energise. As air is drawn across an evaporator coil. This means moisture will condense out of the air. The air is then reheated through the condenser coil and distributed back into the room. 

 The built-in IW25-5 ON-Wall dehumidifier is designed for direct surface wall mounting on surfaces including CMU block, masonry, concrete, brick, etc.

 The IW-25-5 ON Wall dehumidifier includes the IW-25-5 dehumidifier with bi-polar ioniser, 1 ON Wall front cover, 1 ON Wall washable air filter, 1 drain hose, and clamp, 1 power cord, 1 front cover tool, 1 set of tamper-resistant screws, and 1 Operations Manual. 

All dehumidifier parts are included with the purchase. 

The mounting screws are not provided with purchase because the type will vary based on mounting surface.

Item                                       Length cm    Width cm    Height cm   Weight kg 

IW-25-5 Dehumidifier    43.48                  21.49             77.60              20

On wall Cover                   78.74                  45.72             5.72                1.8 

In wall Cover                     78.74                  45.72             5.72                2.7 

Wall sleeve                         80.01                 45.72              7.62                3.1

Condensate Pump         30.48                  30.48             10.16              1.0